Back-Up Radio Monitoring...
That Extra Peace-of-Mind
So what is Radio Back-up Monitoring? Well it's simple. Whether in your
home or office, your standard alarm panel sends it's alarm signals via standard
telephone lines. This is the most conventional way and is very reliable, with a
back-up radio, the central station information is not only sent through
the phone line, but is also transmitted wirelessly. It is a true backup system
but also provides additional security. In the event that the telephones lines
are compromised from bad weather, accidents, workers on the lines and even the
"intentional cutting" of your phone line, these incidents may prevent the alarm
signal from reaching the central station. With Back-up Radio you can be
assured that the vital information that the alarm panels sends will arrive at
it's intended destination.
 A
back-up radio also sends in a daily test signal to let us know that all is well.
In the event that your radio is in need of service or is not sending signals
properly, Panther Alarms will be notified and a service call will be generated
so we can make a site visit to rectify the problem.
This system will provide an additional line of security and peace of mind for
you and your family.
KEY FEATURES:
-
Nationwide cellular system coverage interfaces with virtually any alarm control
to AlarmNet radio network for alarm signal transmission
-
Seamless wireless connectivity through cellular networks to AlarmNet equipped
central stations
-
Timed status check-in for radio link supervision
The 7845C communicates on
the Cellular Network’s Control Channel. Alarm and status packets are transmitted
into the cellular network control channel where they are identified and routed
to the AlarmNet Control Center. The AlarmNet Control Center logs status checks
and routes alarms via RF to any AlarmNet equipped Central Station anywhere in
the country. There is no cellular phone call required and no system busy
conditions to deal with. It is fully supervised by AlarmNet and there is a low
fixed monthly charge for normal traffic. There is no additional hardware or
software required in Central Stations already equipped to receive AlarmNet. The
transceiver connects to virtually any alarm control panel.
Please contact us for more info.
|
